- Repairs and Adjustments
- Planned Maintenance
- Replacement - fitting a new door closer.
- Upgrade existing door sets to EURO ratings, to comply with
- fire regulations (when it doesn't close), and/or
- health and safety standards (it swings through too quickly).
New Axim Door Closers being fitted
The existing floor springs were worn and not closing properly. They were replaced with Axim 4001.
Replacement of old broken Viscount Door Closer
This was causing the door to slam against the frame - against health and safety regulations.
Replacement of Door Closers that were worn and would not close.
The existing floor springs were worn and not closing properly. They were replaced with Axim 4001.
 |
 |
| New Axim Floor spring fitted to doors | Arched Doors Completed |
Replacement of old broken Viscount Door Closer
This was causing the door to slam against the frame - against health and safety regulations.
 |
 |
| Doors leading to Fire Escape | Old broken Viscount Floor Spring |
 |
 |
| Derek cutting old floor spring outer box | Derek fitting new floor spring |
 |
 |
| Floor spring fixed in place with new bottom shoe and door fitted | Door complete and with new brass top cover plate fixed |
 |
|
| Both doors completed | |
Replacement of Door Closers that were worn and would not close.
 |
 |
| The existing floor spring has been cut out and the new Dorma floor spring is fitted | Derek mixing up chemical cement |
 |
 |
| Derek pouring cement around floor spring | Floor spring fixed and the door is refixed onto the spring |
 |
 |
| The top of the door is glued and clamped ready to be fitted with the new top centre | Doors fitted, cover plates fixed - contract complete |
|